Product Categories
Contact Us

NFC Type 2 Tag 64bytes NFC Card Mifare Ultralight

NFC Type 2 Tag 64bytes NFC Card Mifare Ultralight

Specification:- Dimensions: CR80 85.60 x 53.98mm- Thickness: 0.84 +- 0.02mm- Material: PVC (option: PET, PC, PET-G)- Card Surface: Matt/ glossy finish- Housing: LaminationPersonalization:- Offset Printing- S...

Product Details

Specification:
- Dimensions: CR80 85.60 x 53.98mm
- Thickness: 0.84 +- 0.02mm
- Material: PVC (option: PET, PC, PET-G)
- Card Surface: Matt/ glossy finish
- Housing: Lamination

Personalization:
- Offset Printing
- Silkscreen Printing
- Magnetic stirp HICO, LOCO
- Thermal print


NFC Type 2 Tag 64bytes NFC Card Mifare Ultraligh

1.1 Key applications

  • Limited RFID CARD use tickets for public transport
  • Limited use tickets for event ticketing

1.2 Contactless energy and data transfer 
MF0ICU1 is connected to a coil with a few turns. The MF0ICU1 fits the TFC.0 (Edmondson) and TFC.1 (ISO) ticket formats as defined in BS EN753-2.
TFC.1 format tickets are supported by the MF0ICU10 chip which features a 17 pF on-chip resonance capacitor.
The smaller TFC.0 format tickets are supported by the MF0ICU11 chip which features a 50 pF on-chip resonance capacitor.
1.3 Anticollision 
An intelligent anticollision function enables simultaneous multicard operation. The anticollision algorithm individually selects each card and ensures correct execution of a transaction with the selected card without data corruption from other cards in the field.
1.3.1 Cascaded Unique IDentification (UID) 
The anticollision function is based on an IC individual serial number called Unique Identification (UID) for each IC. The UID of the MF0ICU1 comprises 7 bytes and supports ISO/IEC 14443-3 cascade level 2.
1.4 Security

  • 7-byte UID in accordance with ISO/IEC 14443-3 for each device
  • 32-bit user definable One-Time Programmable (OTP) area
  • Field programmable read-only locking function per page

1.5 Delivery options 
MF0ICU1 can be delivered in packaged or wafer form. Refer to delivery type description for more information.
Features and benefits
2.1 MIFARE RF interface ISO/IEC 14443 A

  • Contactless transmission of data and supply energy (no battery needed)
  • Operating distance up to 100 mm depending on antenna geometry
  • Operating frequency of 13.56 MHz
  • Data transfer of 106 kBs
  • Data integrity of 16-bit CRC, parity, bit coding, bit counting
  • Anticollision
  • 7-byte serial number in accordance with ISO/IEC 14443-3 cascade level 2
  • Typical ticketing transaction time of < 35 ms
  • Fast counter transaction time of < 10 ms

2.2 EEPROM

  • 512-bit, organized in 16 pages with 4 bytes per page
  • Field programmable read-only locking function per page
  • 32-bit user definable One-Time Programmable (OTP) area
  • 384-bit user Read/Write area (12 pages)
  • Data retention time of 5 years
  • Write endurance 10000 cycles

This technology rfid inlay by free contact and in the light of the radio frequency identification (RFID), by philips semiconductor (now en pu semiconductors), nokia and SONY joint research and development, it is based on RFID and interconnection technology. NFC is a short-range hf radio technology, run the 13.56 MHz frequency within 20 cm distance. The transmission speed is 106 Kbit/SEC, 212 Kbit/SEC three or 424 Kbit/SEC. The near field communication has passed into the ISO/IEC IS 18092 international standards, EMCA - 340 standard and ETSI TS standard 102-190. NFC using both active and passive reading mode.


For accurate price and shipping rate, please Email us or submit contact from at the buttom of the page. Our service team will carry on and take care of all your needs.

Hot Tags: mifare card, rfid key cards, nfc type 2 tag 64bytes nfc card mifare ultraligh factory, nfc type 2 tag 64bytes nfc card mifare ultraligh online, nfc type 2 tag 64bytes nfc card mifare ultraligh design, nfc type 2 tag 64bytes nfc card mifare ultraligh price
Related Products
Email Us
Feedback
Colourmax Printing Co.,Ltd
Copyright © Colourmax Printing Co.,Ltd. All Rights Reserved.